|
The Push Server is a feature of the DV2000/DV4 that is used to push Emergency Alerts and call information to an Avaya web-enabled IP phone, without interfering with the normal processing of the calls.
Requirements
| • | IP Office CTI Pro license for each AVAYA IP Office PBX |
| • | EAS configured and operational |
| • | AVAYA web-enabled IP phone |
| • | 9600 series (9608, 9620, 9621G, and 9641G). |
| • | 4600 series (4620, 4621, and 4625). |
| • | Server for IP phones to retrieve configuration. This can be handled via any of the following methods: |
| • | InnDesk version 1.6 or above. |
| • | TFTP server (for the 4600 and 5600 series phones only). |
Supported Features
| • | Supports notifying one or more extensions if any monitored extension dials an emergency number. |
| • | Does not interfere with the normal processing of any call (including calls to emergency numbers). |
| • | Captures call data for all telephone sets (both analog and digital). |
| • | Only requires the receiver of the push data to be a web-enabled IP telephone. |
| • | Supports unlimited number of IP telephones. |
| • | Does not require the IP telephones to have associated mailboxes on the system. |
| • | Requires zero configuration for any additional IP telephones after initial installation. |
|
