====== Pagers with SIP ======
When performing a callout notification to a pager using SIP the pager display information must contain special DTMF.

<WRAP center round important 60%>
Pager notification is not supported with version 8 and beyond.
</WRAP>

| **M** | Instructs the SIP channel to dial DTMF as tones rather than SIP packets. |
| **T** | Instructs the SIP channel to dial DTMF using SIP packets. This is the default setting for all new calls.|
| **,** | Instructs the SIP channel to pause for 1 second. This cannot be preceded by M and if so will be ignored. To perform a pause, always precede it with a T or before an M. |

===== Example =====
  - System will call 425-555-12212.
  - When it gets an answer it will wait 1 second.
  - Then dial 2800 as tones.
  - Then revert to DTMF signalling.
  - Pause 1 second.
  - Then dial 15 as tones.

{{:images:howto:sippagerdisplay.png?direct|}}